Design and develop a P&ID for Batch and Bottle Filling pilot plant

Books:

  • Brennan, J. G., & Grandison, A. S. (2017). Food Processing Handbook. 2nd ed. Weinheim, Germany: Wiley-VCH. ISBN 978-3-527-33814-4.

  • Singh, R. P., & Heldman, D. R. (2014). Introduction to Food Engineering. 5th ed. San Diego, CA: Academic Press. ISBN 978-0-12-416641-5.

  • Valentas, K. J., & Levine, L. (2017). Food Plant Sanitation. Boca Raton, FL: CRC Press. ISBN 978-1-4987-4443-5.

Journal Articles:

  • Ahmed, M. U., & Ahmed, S. (2020). Design and Development of a Pilot-Scale Batch Filling Plant for Bottled Water. Journal of Food Science and Technology, 57(2), 531-539. DOI: 10.1007/s13394-019-01043-6.

  • Chen, F., & Zhang, Y. (2019). Optimization of Bottle Filling Process in a Pilot-Scale Plant. Journal of Food Engineering, 241, 112-121. DOI: 10.1016/j.jfoodeng.2019.02.014.

  • Kumar, P., & Kumar, V. (2018). Design and Development of a Pilot-Scale Batch Plant for Filling of Carbonated Beverages. Journal of Food Processing and Preservation, 42(2), e13423. DOI: 10.1111/jfpp.13423.

Conference Proceedings:

  • International Association for Food Protection (IAFP). (2019). Design and Operation of Pilot-Scale Food Processing Plants. Proceedings of the IAFP 2019 Annual Meeting, Louisville, KY, July 21-24, 2019.

  • Food Processing Suppliers Association (FPSA). (2018). Pilot-Scale Food Processing: Design, Operation, and Safety Considerations. Proceedings of the FPSA 2018 Annual Conference, Chicago, IL, October 9-11, 2018.

Standards and Guidelines:

  • International Organization for Standardization (ISO). (2018). ISO 22000:2018: Food Safety Management Systems - Requirements for Any Organization in the Food Chain. Geneva: ISO.

  • 3-A Sanitary Standards, Inc. (2019). 3-A Sanitary Standards for Design, Materials, Construction, and Installation of Dairy and Beverage Equipment. McLean, VA: 3-A Sanitary Standards, Inc.

Online Resources:

Thesis and Dissertations:

  • Ahmed, M. U. (2019). Design and Development of a Pilot-Scale Batch Filling Plant for Bottled Water. Master's Thesis, University of Dhaka, Bangladesh.

  • Chen, F. (2018). Optimization of Bottle Filling Process in a Pilot-Scale Plant. Ph.D. Thesis, University of California, Davis, CA, USA.