Procedure

1. Piping Diagram Configuration

• Configure all parameters for the piping diagram. Identify vessels and equipment required to run the plant.
• Click on the Verify Components button.
• If all configuration parameters are correct, the Next Level button will be visible.
• Click on the Next Level button to proceed.

2. Instrument Diagram Configuration

• Follow the same steps as above to configure the instrument diagram. Identify the instruments required to run the plant.
• Click on the Verify Instruments button.
• If all configuration parameters are correct, the Next Level button will be visible.
• Click on the Next Level button to continue.

3. Sequence of Activities

• Read the "Prior Knowledge Assessment" statements carefully.
• Enter the appropriate sequence number in the provided text box. The system will not allow duplicate numbers, so be careful.
• Click on the Submit button.
• You have three attempts to verify whether the sequence is correct.
• Try three times before proceeding to the Simulation section.

4. Simulation Execution

• Click on the Start button to begin the simulation.
• The first-time setting runs for 5 minutes by default.
• For other test cycles, you can choose different time durations such as 2 min, 3 min, 4 min, etc.
• The simulation will display the status and phases during execution.
• You can start the next test cycle or view the datasheet and trends according to the test cycles.
• The datasheet for each test cycle can be downloaded in PDF format by clicking on the Download button.
• Multiple readings are available in line format.
• Use the checkbox to view different series or hide specific series as needed.

4.1. Download Graph

• Click on the Download Graph button to save the graph.

4.2. Data Monitoring & Graphs

• View the Datasheet and Trends accordingly.
• The trend functionality allows you to see multiple readings in a line or trend format.
• Use the checkbox to switch between different series or hide/show specific data.
• Download the graph using the Download Graph button.

4.3. Result Assessment

• Click on the Result button to view your performance assessment.