Procedure

Configuration

• Select input Pin For the sensor
• Select output Pin For for the DC Motor
• Select the Sensor Type (Inductive or Capacitive)
• Select object material
• Click on "GENERATE CODE" button to generate code
• Click on "COMPILE" button to compile code
• Click on "EXECUTE" button to execute code and goto mimic
• If you want to download code click on "DOWNLOAD" button
• The MIMIC will open on left side of screen

Simulation

• Connect the Output Pin from the Arduino to the transistor by click on the connecting points
• Connect the selected Input Pin from the Arduino to the sensor by click on the connecting points
• Connect the relay and DC motor according to the circuit diagram by click on the connecting points
• Connect the relay and power supply according to the circuit diagram by click on the connecting points
• Click on "Check Connection" to validate the circuit connections
• If connections are shows wrong then you can click on the particular connected line to delete the wrong connection (wrong connection shows in RED color)
• After completion of circuit click on check connection fire will displayed in front of sensor
• Click on "Plus" and "Minus" buttons for increase and decrease the temperature
• When temperature reached in between the sensing range of the sensor then current will flows through the circuit and motor starts running
• Observe the changes in circuit and rotation of motor while changing the temperature from sensor
• Click on "Next Level" button for next steps

Questions

• Read all the questions carefully and submit the answer
• After submission, "Result" page will displayed