Procedure for support removal

1. Select support removal from the list.
2. All the parts related to support removal are shown on the screen.
3. Select the parts in sequence in which they are shown.
4. When first part will be selected then it will open in the blank space in the left side of the screen.
5. If user follows incorrect sequence then a pop-up will appear on the screen showing the name of the part to be selected.

Procedure for UV Curing

1. Select UV curing from the list.
2. All the parts related to UV curing are shown on the screen.
3. Select the parts in sequence in which they are shown.
4. When first part will be selected then it will open in the blank space in the left side of the screen.
5. If user follows incorrect sequence then a pop-up will appear on the screen showing the name of the part to be selected.

Procedure for heat treatment

1. Select heat treatment from the list.
2. All the parts related to heat treatment are shown on the screen.
3. Select the parts in sequence in which they are shown.
4. When first part will be selected then it will open in the blank space in the left side of the screen.
5. If user follows incorrect sequence then a pop-up will appear on the screen showing the name of the part to be selected.