STEP 1 : Make connections as per the instructions given below:

1. M₁ of MCB - M₃ of Kit
2. M₂ of MCB - M₄ of Kit
3. D₁ of Digital Null Detector - D₃ of Circuit Diagram
4. D₂ of Digital Null Detector - D₄ of Circuit Diagram
5. X₁ - S₁ of Capacitor
6. X₂ - S₂ of Capacitor

NOTE : If wire is wrongly connected, Click on node number to detach the wire.

STEP 2 : Click on   CHECK  button for checking the connections.

STEP 3 : Click on the MCB to Turn ON the circuit.

STEP 4 : Vary x10Ω knob by selecting the values from dropdown until you reach the minimum value of the digital null detector.

STEP 5 : Now, Vary x100Ω knob by selecting the values from dropdown until you get the minimum value of the digital null detector.

STEP 6 : Click on   ADD  button to add the readings to the Observation Table.

NOTE: If combination is wrong then select another combination & the balanced condition button becomes active after the wrong combination alert.

STEP 7 : Click on   PRINT  button to print the webpage.

STEP 8 : Click on   RESET  button to reset the webpage.