Study and operation of the Process Simulator setup 
1. Consider a system with transfer function
The value of damping ratio will be 0.5 when the value of k is _____
The value of damping ratio will be 0.5 when the value of k is _____
2. The time constant of a first order process with resistance R and capacitance C is
3. Which of the following controllers has maximum offset ?
4. The gas temperatures at any two given instants are the same. The process is _____.
5. What is the relationship between the steady-state error, gain and the tendency of oscillations when the controller is supposed to be under the proportional action?
6. The input to a controller is
7. Proportional band of the controller is expressed as
8. Most thermal processes in process control systems do not involve _____ heat transfer.
9. In case of a PID controller, the _____ process involved may cause serious noise problems
10. The use of a lag–lead compensator raises the order of the system by ______ unless cancellation occurs between zero(s) of the lag–lead compensator and pole(s) of the uncompensated open-loop transfer function.