Procedure

1. Piping Diagram Configuration

• Configure all parameters for the piping diagram. In which you need to identify vessels and equipment to run the plant.
• Click on the "Verify Components" button.
• If all configuration parameters are correct, the "Next Level" button will be visible.
• The button is placed below the "Verify Components" button.
• Click on the "Next Level" button to proceed.

2. Instrument Diagram Configuration

• Follow the same steps as above to configure the instrument diagram, In this you will have identify the instruments required to run the plant.
• Click on the "Verify Instruments" button.
• If all configuration parameters are correct, the "Next Level" button will be visible.
• The button is placed below the "Verify Components" button.
• Click on the "Next Level" button to continue.

3. Sequence of Activities

• Read the "Prior Knowledge Assessment" statements carefully.
• Enter the appropriate sequence number in the provided text box. The system will not allow you to write the duplicate numbers. Hence be careful
• Click on the "Submit" button.
• You have three attempts to verify whether the sequence is correct or otherwise.
• Try for three times and then proceed to the Simulation section.

4. Simulation Execution

• Click on the "Start" button to observe the readings and simulation outputs. This step is important from understanding process point of view.
• The simulation will display the status and phases during execution.
• You can start the next test cycle or view the datasheet and trends according to the test cycles.
• The datasheet for each test cycle can be downloaded in PDF format by clicking on the "Download" button.
• Multiple readings are available in line format.
• Use the checkbox to view different series or hide specific series as needed.

4.1. Data Monitoring & Graphs

• View the Datasheet and Trends according to the test cycles.
• The trend functionality allows you to see multiple readings in a line or trend format.
• Use the checkbox to switch between different series or hide/show specific data.
• Download the graph using the "Download Graph" button.

4.2. Result Assessment

• Click on the "Result" button to view your performance assessment.