1. Input Parameters

Provide the following inputs to run the simulation:

1. Number of Bits: Enter the desired number of bits you want to generate (e.g., 100).
2. Carrier Frequency (Hz): Input the carrier frequency for the modulation (e.g., 1000 Hz).
3. Baud Rate (Hz): Specify the baud rate for the transmission (e.g., 200).
4. Modulation Type: Select the modulation type from the dropdown menu (either MSK or GMSK).

2. Generating the Signal

After entering the input parameters, click the "Generate Signal" button to initiate the signal generation process. The simulator will compute the generated bits and relevant parameters based on your input.

3. Viewing Output

The simulator will display the output below the input fields. This will show you the number of bits generated along with the selected modulation type, carrier frequency, and baud rate.

4. Analyzing Results

Review the generated output to understand the effects of the selected parameters. You may visualize the signal or analyze its properties based on the modulation scheme used.

5. Adjusting Parameters

If you want to run another simulation, modify the input values as needed and click the "Generate Signal" button again. Experimenting with different values will help you observe how they affect the output signal quality.