Tools
Performance Tool
Validation Tool
Aim
Theory
Pretest
Procedure
Simulation
Posttest
References
Feedback
Aim
Theory
Pretest
Procedure
Simulation
Posttest
References
Feedback
Drone’s Software Download, Installation and Calibration
Procedure
Click Here to Enter the Lab
Click on Power button to turn On Computer.
Click on Screen to see the Zoom view.
Click on Google Chrome icon to open it.
Type "dji.com" and Click Google Search Button otherwise Press Enter.
Click on dji official website to open it.
Scroll Down and click Download Center option.
Click on Download Center to open it.
Click on DJI Assistant Series to open list.
Scroll down Click on NAZA M V2 Assitant Series option.
Scroll Up and click Download Exe file.
Click Download Exe file.
Your file start Download.
Click to Start Installation.
Select Language and Click on OK button.
Click on Next button.
Click on Next button.
Click on Next button.
Click on Checkbox to check Create a desktop icon menu.
Click on Next button.
Click on Install button.
Click on Finish button.
Your Software is succesfully Installed Click on Computer Screen to Zoom Out.
Test Your Memory
Choose the option and click on the submit button
Click on Next button.
Click on computer screen to see the zoom view.
Click on NAZA M V2 icon to open it.
Click on SKIP to start Software.
Click on Transmitter power button to turn on.
Click on Throttle to check the channel monitor.
Click on Yaw to check the channel monitor.
Click on pitch to check the channel monitor.
Click on Roll to check the channel monitor.
Click on Basic Option.
Now select the type of Drone.
Click on motor test.
Click on Motor M1 and check the motor orientation.
Click on Motor M2 and check the motor orientation.
Click on Motor M3 and check the motor orientation.
Click on Motor M4 and check the motor orientation.
Click on Mounting option.
Click on Default option to set it as default.
Click on RC option.
Click on Start Button.
Click on Throttle and Yaw one by one and check the stick calibrations.
Click on Pitch and Radar one by one and check the stick calibrations.
Click on Pitch and Radar one by one and check the stick calibrations.
Click on three position switch one by one to check GPS, Altitude and Manual Modes.
Click on Gain Option.
Click on Basic Gain Option & Altitude Gain Option one by one to set Aircraft gains manually.
Click on Advance Option.
Select recommended Option.
Click on Fail Safe (F/S) Option.
Choose Go home and landing Option.
Test Your Memory
Choose the option and click on the submit button
Click on Next button.
Click on IOC Option.
Click on intelligent orientation control Option.
Click on Gimbal Option.
Click on Default button to set the device level default.
Click on H3/4 3D Option.
Click on Voltage Option.
Click on Default Button.
Click on Tools Option to do Basic and Advance calibrations.
Click on Advance option.
Click on Upgrade option.
Click on Info option.
Click on close button.
Click on moniter screen for zoom out.
Test Your Memory
Choose the option and click on the submit button
Click on Next button.
Software Installation & Callibration Successfully Completed
Click on Next button.
Thank You For Performing the Experiment
