Design of hall sensors and its applications
Procedure
Prerequisite :
- Attempt all questions.
Use "Reference table" button to get hall coefficients for different materials.
Application type : Measurement of Current
Step 1 : Configure hall sensor parameters: material, flux density, current and thickness.
Step 2 : Click on "simulation" button.
Step 3 : Click on green button to start mimic.
Step 4 : Calculate hall sensor output for change in current.
Step 5 : Enter the answer in textbox and click on "Submit" button.
Step 6 : Repeat the above steps for five readings.
Step 7 : Observe above sensor output for different material.
Application type : Measurement of Thickness
Step 8 : Select another application type for thickness.
Step 9 : Repeat Step 1 to Step 5 for change in thickness.
Step 10 : To get observation table and graph click on "Show Result" button.