To study the making of cores using core sand
Procedure
Step-1. Click on 'Ladle' to POUR the binder into the moulding sand. Core sand prepared.
Step-2. Click on 'Core Sand' to TRANSFER it into the core-box.
Step-3. Click on 'Rammer' to RAM the core sand into the core-box.
Step-4. Click on 'Pin' to make a HOLE into the core.
Step-5. Click on 'Cylinder' to PUMP carbon dioxide into the core.
Step-6. Click on 'Rammer' to RAM the core-box to loosen the core. Core prepared.