- Drag the UTM Machine from the tools.
- Right click on the machine and click on pin.
UTM Machine
Mild Steel Sample
Step 1: Placing of the UTM Machine
Step 2: Placing of the sample in the UTM Machine.
- Right click on the sample, rotate and drag it close to the furnace machine.
- Now,place the sample on the machine & click on pin.
- You can adjust zoom level also (Via Mouse Wheel).
Step 3: Start the Test.
- Click below buttons to start the machine.
Test 1: Test till fracture
Test 2: Unloading and immediately retesting
Test 3: Unloading and retesting after aging
Test 1
| Strain | Stress |
Test 2
| Strain | Stress |
Test 3
| Strain | Stress |
Step 4: Results
- Engineering Stress vs Engineering Strain.
| Test 1 | Test 2 | Test 3 | |
| Lower yield Stress (MPa) | 99.7 | - | 213 |
| Upper yield Stress (MPa) | 106.5 | - | 215.4 |
| YS for furnace Sample (MPa) | - | 116 | - |
| UTS (MPa) | 218 | 243 | 259 |
| Fracture elongation (%) | 38.8 | 38.7 | 30.5 |
Step 5: Activity.
Click next button to continue.