Monolithic Formwork
Objective:
To set the Monolithic Room
Apparatus Materials:Base plate, rebar, deck panel, mid beam, CT prop, wedge pins, wall corner, wall tie, soffit etc.
Step 1
Calculation of cross-sectional area:
Welcome to
Monolithic Formwork Experiment
of Formwork Technology in Civil Engineering Virtual Lab
developed by Prof. K. N. Jha, Department of Civil Engineering, IIT Delhi.
Prof. K. N. Jha
IIT Delhi
| Calculations: | |
|---|---|
| Total Length(m) | |
| Weight(kg) | |
| Cross-sectional area (mm2) | |
Results
Date of test:
Grade of Steel: 550 SD steel
| Weight of specimen (g) | 698 |
|---|---|
| Length of specimen (mm) | 805 |
Effective cross-sectional area, So(mm2) =
|
110.4 |
Original gauge length L (mm) =
|
59.4 |
| Choosen gauge length Lo (mm) | 60 |
| Yield Stress (MPa) | 480.84 |
| Tensile Strength (MPa) | 600.62 |
| TS/YS Ratio | 1.25 |
| Final gauge length, Lu mm | 77 |
| Final diameter minimum (mm) | 7.1 |
| % Elongation after fracture | 28.33 |
| % Reduction in area | 64.13 |
Question text
-
India
Certificate of Completion
Sneha Jadon
has succesfully performed Virtaul Lab Experiment on
Foundation in Formwork
Date 10-10-2023
which is developed by
VIRTUAL LABS - IIT Delhi
Title
Image Box