STEP 1 : Make connections as per the instructions given below:

NOTE: If wire is wrongly connected, Click on node number to detach the wire.

STEP 2 : Click on "CHECK" button for checking the connections.

STEP 3 : Click on the MCB to Turn ON the circuit.

STEP 4 : Select the value from Multiplier dropdown.

STEP 5 : Now, Varying the value from S and KDB dial dropdown.

STEP 6 : Now push the RED button to check whether the condition is balanced or not.

STEP 7 : Click on "ADD" button to add the values to the Observation Table when Galvanometer shows zero deflection.

STEP 8 : Add different values to the table by selecting different value of multiplier.

NOTE: Balanced condition button becomes active after wrong combination alert by clicking on ADD button.

STEP 9 : Click on "PRINT" button to print the webpage.

STEP 10 : Click on "RESET" button to reset the webpage.