Click on "EXECUTE" button to execute code and goto mimic.
If you want to download code click on "DOWNLOAD" button.
The MIMIC will open on left side of screen.
Mimic
Connect the Output Pin to the Anode.
Click on the cathode terminal (red circle) and then click on the resistor terminal (red circle) to connect the cathode with the resistor or vice versa.
Click on the selected input pin terminal (blue circle) and then click on the switch terminal (blue circle) to connect the input pin with the switch terminal or vice versa.
Click on the "Check Connection" button.
If connection is wrong, click on "Reset Connection" button and follow steps 1, 2, 3, and 4 again.
If connection is successful, click on Switch available on the screen with black color and hold the switch for a few seconds.
While holding the switch, Output LED is on. Observe the square wave graph to see how the output changes until you complete the observation.
Click on the "REFRESH" button to re-execute the experiment.
COEP TECHNOLOGICAL UNIVERSITY, PUNE
