Output Characteristics of IGBT

COMPONENTS

DC Source

IGBT

Ammeter

Resistor

Voltmeter

Ground

10

11

IC

14

15

RC

5

6

RG

7

8

9

IGBT

1

2

VGG

3

4

VGE

12

13

VCE

16

17

VCC

18

GND

STEP 1: Drag and drop the components in the workspace to create the circuit.

Nos of required components:

DC Source – 2, IGBT – 1, Resistor - 2, Voltmeter - 2, Ammeter - 1, Ground - 1

STEP 2: Make the connections as per the instructions given below:

(a) (01-05, 03-05, 06-08, 02-18)

(b) (04-18, 09-18, 07-10, 11-14)

(c) (14-12, 13-18, 15-16, 17-18)

Note: Click on the wire to delete the connection.

STEP 3: Click on the CHECK button to check the connections.

Note: Right click on the component to open the dialog box to edit the properties of the component.

STEP 4: Select the value from VGG.

STEP 5: Now, Select the value from VCC and click on the ADD button to insert the reading into the observation table.

STEP 6: Change the values in VCC by repeating Step 5 upto 7 V, then the Graph will plot automatically.

STEP 7: Now, Change the value in VGG and repeat Step 5 to 6 to take more readings in the table.

STEP 8: Click on Transfer Characteristics button to plot the transfer characteristics.

STEP 9: Click on the PRINT button to take out the print of the webpage.

STEP 10: Click on the RESET button to reload the webpage.