×
To determine hall coefficient , carrier density and mobility of a given semiconductor material.
- Step 1: To measure the magnetic field generated in the solenoid
- Step 2: Select Magnetic field Vs Current from the procedure selection-box.
- Step 3: Click on probe to placing the probe in between the solenoid in the simulator.
- Step 4: Using Current slider, varying the current through the solenoid and corresponding magnetic field is to be noted from Gauss meter.
- Step 1:Select Hall Effect Setup from the Select the procedure combo box
- Step 2:Click Hall Probe button to Placing the probe in between the solenoid by in the simulator.
- Step 3:Set "current slider" value to minimum.