Welcome to "Virtual Labs"
Please wait while its loading...
Drone's Take-off, Flight and Landing Basics
Click Here to Enter the Lab
Precautions
3. Determine the potential hazards before beginning any work.
2. Know locations of laboratory safety showers, eyewashstations, and fire extinguishers.
1. No cell phone or ear phone usage in the laboratories.
4. Avoid wearing jewellery in the lab as this can pose multiple safety hazards.
5. Long hair and loose clothing must be pulled back and secured.
6. Avoid contact with energized electrical circuits.
7. Do not touch anything if your hands are wet. The "one-hand" approach is safest.
8. Do not make circuit changes or perform any wiring when power is on.
9. All equipment should be regularly inspected for wear or deterioration.
10. Know emergency exit routes.
Binding
Test Your Memory
Total Marks:
Q1.
For binding we press _______
A Down button
B OK button
C Cancel button
D Bind button
A Down button
B OK button
C Cancel button
D Bind button
Congrats !! You get "1" mark.
Pre Flying Test
1
2
3
4
5
6
7
8
9
10
Test Your Memory
Total Marks:
Q2.
If LED colour is yellow then we have to rotate the drone _______.
A Vertically
B Horizontally
C 90°
D 180°
A Vertically
B Horizontally
C 90°
D 180°
Congrats !! You get "1" mark.
Transmitter Setup
OK
Cancel
Down
Up
OK
Cancel
Down
Up
Test Your Memory
Total Marks:
Q3.
To select airplane or glider we should go on _______ option.
A Model name
B Model select
C RX Setup
D Type select
A Model name
B Model select
C RX Setup
D Type select
Congrats !! You get "1" mark.
Take Off
Test Your Memory
Total Marks:
Q4.
In safety alarm we get instruction to place all switches in their up position and throttle in _______ position.
A Lower
B Up
C Left
D Right
A Lower
B Up
C Left
D Right
Congrats !! You get "1" mark.
Flight of Drone
Test Your Memory
Total Marks:
Q5.
To move our drone to the right side, we should move direction stick to the _______.
A Up
B Down
C Right
D Left
A Up
B Down
C Right
D Left
Congrats !! You get "1" mark.
Landing
| Question | Correct Answer |
| Q1. For binding we press _______. | Bind button |
| Q2. If LED colour is yellow then we have to rotate the drone _______. | Horizontally |
| Q3. To select airplane or glider we should go on _______ option. | Type select |
| Q4. In safety alarm we get instruction to place all switches in their up position and throttle in _______ position. | Lower |
| Q5. To move our drone to the right side, we should move direction stick to the _______. | Right |
Total Marks Obtained :
/ 5
Thank You For Performing the Experiment