Instructions for Spectral Estimation using Blackman–Tukey Method
Step 1: Click on "Generate Input Signal" to generate the signal.
Step 2: Enter the input frequency value in Hz in the parameters section.
Step 3: Select the window type from the dropdown menu.
Step 4: Select the base signal from the dropdown menu.
Step 5: Choose an operation such as addition, multiplication, or convolution from the dropdown menu.
Step 6: Add AWGN noise by entering the SNR value (in dB) in the input field.
Step 7: Click the "Simulate" button to run the simulation.
Step 8: Reset the simulator by clicking the "Reset Simulator" button.
Generate Input Signal
Parameters
Input Signal Frequency (Hz)
Window Type:
Blackman Window
Rectangular Window
Hann Window
Hamming Window
Window Size
Output
Base Signal
Select an input
Sine Wave
Cosine Wave
Operations
Select an operation
None
Addition
Subtraction
Multiplication
Convolution
Add another Signal:
Select an input
Sine Wave
Cosine Wave
Input Frequency (Hz):
AWGN Noise
SNR (in dB):
Simulate
Reset Simulator