- Right click on venier caliper and click on pin.
- Place the sample on the venier caliper.
- Take the gauge length and enter it below:
Length: mm
Tools
Instructions
UTM Machine
Vernier Caliper
Iron Sample
Step 1: Gauge length of the sample
Step 2: Take the diameter of the sample
- Right click on venier caliper and click on unload sample.
- Now, Right click on sample and click on rotate.
- Place the sample on the venier caliper.
- Take the diameter and enter it below:
Diameter: mm
Step 3: Place sample on UTM machine.
- Place the sample on the machine.
- You can adjust zoom level also (Via Mouse Wheel).
Step 4: Start the test.
- Click below buttons to start the machine.
Metal Sample
| Extension (mm) | Load (N) | Strain | Stress |
Polymer Sample
| Extension (mm) | Load (N) | Strain | Stress |
Step 5: Results
Metal
| Yield Strength (MPa) | 21 |
| UTS (MPa) | 78.5 |
| Fracture elongation (%) | 65.9 |
Polymer
| Flow Stress (in the region CD) (MPa) | 16 |
| Fracture elongation (%) | 655.5 |
Step 6: Activity.
Click next button to continue.