Tensile Test - Steel

Tools

Instructions

UTM Machine

Vernier Caliper

Steel Sample

Step 1: Take gauge length of the sample

Right click on venier caliper and click on pin.
Place the sample on the venier caliper.
Take the gauge length and enter it below:

Length: mm

Step 2: Take the diameter of the sample

Right click on venier caliper and click on unload sample.
Now, Right click on sample and click on rotate.
Place the sample on the venier caliper.
Take the diameter and enter it below:

Diameter: mm

Step 3: Place sample on UTM machine.

Place the sample on the machine.
You can adjust zoom level also.

Step 4: Start the test.

Click below buttons to start the machine.

Extension (mm)	Load (N)	Strain	Stress (MPa)

Step 5: Results