Instructions for Spectral Estimation using AR-Modeled Yule-Walker Method

Step 1: Click on "Generate Input Signal" to generate the signal.
Step 2: Select the base signal from the dropdown menu, and enter the input signal frequency (Hz), sampling frequency (Hz), and the AR model order in the parameters section.
Step 3: Choose an operation such as addition, multiplication, or convolution from the dropdown menu.
Step 4: Add AWGN noise by entering the SNR value (in dB) in the 'AWGN Noise' section.
Step 5: Click the "Simulate" button to run the simulation.
Step 6: Reset the simulator by clicking the "Reset Simulator" button.

Parameters

Base Signal
Input Signal Frequency (Hz) Sampling Frequency (Hz) AR Model order(s):

Input Signal

AWGN Noise

SNR (in dB):

Operations

Power Spectral Density (PSD) Estimation

Upload CSV and See Output

Sampling Frequency (Hz): AR Model order(s):

Input Signal

Output