Instructions:

1. Before starting the process read the instructions completely
2. Select either Laser Welding or Friction Stir Welding
3. If Laser Welding is selected follow the below steps.
• Select either Meltpool and Temparature Evaluation or Laser Power Profile
• If Meltpool and Temparature Evaluation is selcted then follow the below dteps
• Select one Laser-Power (in Watts) value from 1000, 1500 or 2000 radio buttons
• Select one Scan-speed (in mm/sec) value from 1200, 1300 or 1500 radio buttons
• Click on Submit button and wait for the generation of the result
• Observe the out put below and its result
• Repeat the experiment by selecting the different values and Submit
• If Laser Power Profile is selcted then follow the below dteps
• Enter the value of Beam Diameter (cms) radio buttons
• Enter the value of Power (Watts) radio buttons
• Click on Submit button and wait for the generation of the result
• Observe the Power Distribution on Focal Plane graph
• Repeat the experiment by entering the different values and Submit
• Repeat the experiment by selecting the other tecnique.
4. If Friction Stir Welding is selected follow the below steps.
• Select the Rotation Speed (RPM) from dropdown list
• Enter the Weld Speed (mm/min) in the input box with in the range of (0-450)
• Click on Submit button to start the process
• Observe the calculated Torque (N-m) value after the process
• Repeat the experiment with different values
5. Repeat the experiment with different Welding Technique